Speco-technologies 4HD Manuale Utente

User Guide (Ver. 1.3) Model: DVR4HD 4 Channel HDcctv Digital Video Recorder About This User Guide Prior to installation, carefu

10 7-3. Transferring Still Images or Video from the ARCHIVE List ... 42 7-4. Playback of Bac

11 1. Name and Function 1-1. Front Panel The following information will help you to operate the front panel controls. Figure 1.1.1. Front panel

12 Press to move right in the menu or to change the values in setup mode and to select. camera 2 in live mode. It is also used as the num

13 2. Connection Figure 2.1.1. Rear Panel Table 2.1.1. Rear Panel Connections NO Connection Purpose 1 VIDEO IN 4 BNC connectors for video inpu

14 UNIT ID Reserve PIN for additional feature 11 ETHERNET RJ-45 connector for network function 12 E-SATA To archive still-image or video into an exte

15 Table 3.1.1. Setup Menu Tree  DISPLAY – OSD – OSD CONTRAST – SEQUENCE – SEQ-DWELL TIME – CHANNEL - NAME  RECORD – CHANNEL - RESOLUTIO

16 – SET DATE & TIME – NTP – SEND EMAIL  SECURITY – USER AUTHENTICATION – USER PASSOWRD  NETWORK – PORT – WEB PORT – NETWORK TYPE (

17 3-2. Setup – Display Mode Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select DISPLAY icon and pre

18 Figure 3.3.1. Recording Mode Setup Screen Table 3.3.1. Menu Items in Recording Mode Setup Menu item Description CHANNEL Select a channel for app

19 RECORDING Assign the recording mode for each channel. Options are: Continuous, By Motion, By Sensor, By Schedule or Disable. SENSOR RECORD

2 Safety Precautions Explanation of Graphical Symbols WARNING To reduce a risk of fire or electric shock, do not expose this produc

20 setting for every day. [SUN to SAT]: Move the cursor to SUN to SAT and select a recording mode C,M or S using the SEL button to set the same set

21 Control the motion sensitivity from 1 to 9. KEY TONE Enable/disable key tone. REMOTE CONTROL ID Select an ID of remote control. 1. Select ID. 2. P

22 ② Press SEL button or double click to enter the menu. Then PTZ menu screen is displayed. Figure 3.4.3. PTZ Control Setup Screen Note: For s

23 FULL ZONE: The motion sensor is active on the whole screen. PARTIAL ZONE: The motion sensor is active in the set detection frame. Select the sen

24 Table 3.5.1. Menu Items in STORAGE Setup Screen Item Description OVERWRITE When enabled, the DVR will continue recording and overwrite the oldest

25 3-6. Setup – System Mode Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select SYSTEM icon and p

26 SET DATE&TIME Move the cursor to the display date and time using the control button (◀ ▲ ▶ ▼) and press SEL button to set the present date and

27 3-7. Setup – Security Mode Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select SECURITY icon an

28 ▼) and SEL button. Enter the current password and select OK. Enter the new password and select OK. Enter the same password again to confirm and se

29 STATIC Assigned to an Internet service provider (ISP) to be its permanent address on the Internet. DDNS Enable/disable using domain name addres

3 These Precautions Must Be Followed For Safety Reasons. Warning  Do not use if the unit emits smoke, strange sounds are heard, o

30 Table 3.8.2. LAN Item Description IP The fixed IP address of the DVR unit. SUBNET MASK The subnet mask for the LAN GATEWAY The IP address of the G

31 3-9. Setup - CONFIG Mode Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select CONFIG icon and p

32 3-10. Setup –QUICK SETUP Mode User can easily recording setup. just select desired day/days to record, then DVR will automatically calculate recor

33 5. Live, Search, and Playback 5-1. Live Viewing Screen In the Live screen, video inputs from the cameras are displayed as they are configured i

34 SEARCH Press to go to the search menu. Event search /Time line search /Log /Archive search ARCH Press to capture a still image. The still image wi

35 How to Search Data On the Time-Line Using the Mouse or Front Key Button ① 1 hour moving: 1-hour time bar(Mouse)/ F/REW and F/ADV button(Front

36 1. Select the date of the video to begin searching and navigate through the days using the control button (◀ ▲ ▶ ▼). 2. Once you have selected t

37 6. Once you have selected the type of recording to search for, press SEL to produce a list of instances that fit your search criteria. 7. Use t

38 5-3. Play mode During playback of a recorded event, the mode changes from SEARCH to PLAY. While in PLAY mode, you may return to the SEARCH scree

39 6. PTZ Control To control the PTZ functions of the camera, select MENU and PTZ on the screen using the mouse or press the PTZ button on the front

4 Warning Installation and servicing should be performed only by qualified and experienced personnel. Turn off the power of the DVR when connecting c

40 User can set the preset number in the tour group of the OSD menu. OSD Select the OSD to enter the menu. Control keys are Right, Left, UP, Down, Se

41 7. Back Up 7-1. Still Image Backup onto USB Flash Drive Still images can be captured and archived onto the USB flash drive in live mode or while

42 Figure 7.2.1. Video Archiving and Backup Screen The DVR will convert the corresponding portion of the video into an AVI file. 7-3. T

43 Figure 7.4.1. HD Player

44 8. Upgrading Firmware In order to upgrade, the firmware upgrade file must first be downloaded and copied into the USB flash drive. Create a new f

45 9. Network Access Using the Single-Site Network Viewer The DVR provides a live remote monitoring feature. Remote monitoring requires install

46 4. The setup status screen is displayed. After the installation is completed, “SpecoTech Client” icon is displayed on the desktop. 9-3. Li

47 Button Function Description DATE & TIME Displays the current date and time. CONNECT/DISCONNECT Connect/disconnect network connection.. SEA

48  QUAD/-screen display - Click the QUAD button to switch to quad-screen display  Full screen display - Click the right

49 9-4. Bi-Directional Audio The UMS Client allows for bi directional audio between the client and a dvr unit. On the PC, to use bi directional audio

5 Basic Function of the MOUSE ① : Left button: SELECT function ② Right button: Go to Sub Menu ① : Double click: Change Full Screen or Split Screen

50 MARK IN Set the start time for video backup. MARK OUT Set the ending time for video backup. BACKUP Backup the selected recorded video as AVI fo

51 3. Drag the slid on the time scale and drop it between 0 to 24. 4. Press the PLAY button. Then the video recorded in the remote DVR i

52  Start time / Stop time: Backup time can be changed.  File path: Shows the folder that the backup file is recorded.  Channel: Shows backu

53  Display network statistics: If a user selects this function, the client S/W will display network status, Bit rate and Frame rate.  Time Form

54 Setting Record Set the recording conditions and select channels to record. Select the local disk to use and the amount

55 10. Network Access Using the Multi-Sites Network Viewer 10-1. Installing the Network Software 1. Insert the provided CD in the CD drive and

56 5. After the installation is completed, “SpecoTech Multi Client” icon displays on the desktop screen. 10-2. Live Window When installation is com

57 SITE MANAGEMENT THUMBNAIL REFRESH: Click this icon to refresh and renew thumbnail image of every connected site. SITE ADDITION: C

58 CHANNEL SPLIT To select the numbers of display channel/channels (Single, quad, 9 channels, and 16 channels) of highlighted site. DVR SI

59 10-3-2. Main control panel Button Description LOCAL PLAYBACK Click this icon to run a playback window to search and play videos that a

6 2. Fix the supplied HDD mounting bracket to the hard disk using the supplied mounting bracket screws. 3. Insert the HDD bracket t

60 Directory window shows site/sites that are pre-registered. CONNECT Click this icon to connect the selected site/sites. DISCONNECT Click this

61 The calendar shows dates with recorded video in color. To display the recorded data of selected channel or all channels on a time line

62 10-4-1. General 10-4-1-1. Security Option: Set a password for security options. Select security options and set a password. Then when you access

63 10-4-2. Event Event log can be archived and searched. 10-4-2-1. Archiving Event Log: Specify the location to save event logs and select event to a

64 10-4-3. Record 10-4-3-1. Record Setup: You can set the recording conditions for Always, Event, or Auto record. And you can also select target DVR/

65 10-4-4. OSD You can select the OSD to be display 10-4-5. About “About” provides network client version information.

66 10-5. Remote Setup The menu settings for the DVR unit can be set from a PC, via network. This function will be supported to the next version. Pu

67 10-5-1. Setting the Display Select Display to set the live video display conditions 10-5-1-1. General Settings These settings apply to all channe

68 10-5-2. Record Select Record to set the recording conditions. 10-5-2-1. Common to All Channels Resolution: Sets the resolution for the recordings

69 Audio: Sets whether to perform or not audio recording. Post Event Record: Sets the duration of the event recording. Schedule: Sets the schedule fo

7 Specification ITEM Specification Video Input Channel Input Level 4 Channel HDcctv 720p Video Loss Check YES Output Main Monitor Output HDMI Sub M

70 Sensor In: Outputs an alarm signal when the specified external sensor input terminal receives an input. Motion On: Outputs an alarm signal when th

71 Setting the SPOT: Sets the output conditions of the spot video terminal. Spot Type: Sets the output screen layout of the spot terminal. Spot On E

72 10-5-4. Storage Select Storage to configure continued recording settings by overwriting the hard disk and the storage period for the recording d

73 10-5-5. System Select System to set system and time settings. Setting the System Client Access: To give permission to operate from an external PC

74 OTHER: Sets the start and end dates of the daylight saving period for time zones other than USA and EU. (Begin/End) (Memo: A confirmation dialog i

75 Setting the Send E-Mail: This setting is used to automatically send a notification e-mail to a specified address when an alarm occurs. (Memo: T

76 Setting the NTP: It allows synchronizing the time using an internet of LAN NTP server. NTP: Sets whether to synchronize the time using NTP serve

77 10-5-6. Security Select Security to set password check for user authentication for the specific functions such as SETUP, PLAYBACK, PTZ control, RE

78 10-5-7.Network Select Network to set information about the DVR network. (Memo: If a value on this screen is changed, the DVR will be restarted.)

79 10-5-8. Network – Dual Stream Select Dual Stream to set frame rate and quality for a network streaming. User can set to the following values.

8 Specifications are subject to change without notice External Storage 1 e-SATA SMART HDD Error Check and Reporting Us

80 10-6. Operation 10-6-1. Addition, Delete, and modify of DVR sites 10-6-1-1. Addition of sites 1. Click SITE ADDITION button. And then the fo

81 10-6-1-2. Delete of Sites 1. Select the site/sites to delete from the directory window. 2. Click SITE DELETE button. And then the selected

82 10-6-2. Connect and Disconnect 10-62-1. Connect 1. Select site/sites to connect from the directory window. 2. Click CONNECT button, and

83 10-6-2-2. Disconnect 1. Select site/sites to disconnect from the directory window. 2. Click DISCONNECT button, and then selected site/si

84 10-6-3. Still-image capture during Live 1. Double-click a channel to capture from the display screen. (Otherwise all channels will be captured.).

85 10-6-4. Recording video on local PC during Live 1. Click SETUP button. And then a setup window display. 2. Select Record and set the values.

86 10-6-5. Local Playback and Remote Playback 10-6-5-1. Playback of Recorded Video on Local PC 1. Click LOCAL PLAYBACK button. And then Playback

87 10-6-5-2. Playback of Recorded Video on Remote DVR 1. Click REMOTE PLAYBACK button. And then Playback Window display over Live Wind

88 2. Select site to connect from the directory window. 3. Click CONNECT button. And then Green bar displays on Search calendar and

89 10-6-6. AVI Backup during playback You can back up the recorded videos in AVI format during playback. 1. Double-click the target channel to backu

9 Table of Contents 1. Name and Function ...

90 6. You can also set the beginning time and ending time on this window. After selecting a channel for backup, click the OK button. The backup will

91 11. Network Access Using the 3G App Viewer 11-1. Installing the 3G App Viewer 1. Enter the Apple App Store (For Apple iPhone Users) or the

92 2. Select the in the top right corner for “Site Information” 3. Input the “Site Information” and select to save the “Site Information”

93 Notice 3G Data Usage applied without Wi-Fi connection. Please check with your Phone Carrier.